logo

Due to the safety-critical nature of aeronautical applications, on-board electronic components and systems must operate completely reliably for extended periods of time under extremely harsh environmental conditions.

Electromagnetic compatibility must be carefully addressed as part of the design process to avoid any risk of malfunction of individual components or complete modules caused by interference from other sources.

Appropriate thermal management measures help electronic components to be maintained at an optimal operating temperature and thus ensure stable performance.

image produit

Navigation and control

image produit

Aircraft are equipped with electronic navigation, communication and collision avoidance aids. Our range of microwave shielding seals offers a reliable, high-performance and lightweight solution for the design of compact electronic equipment. Typical applications may include display systems, identification systems (IFF), control units or antennas. In addition to our conductive seals, we offer solutions for heat dissipation and technical sealing in harsh environments.

Interior cabin

image produit

The new generation of in-flight multimedia systems (IFE) used in commercial flights include many services such as touch screens, audio and video services, internet access and even telephone services. However, these systems require special treatment in the management of problems related to electromagnetic interference transmissions/receptions and in the management of heat dissipation.

image produit
image produit

Structure and motorisation

image produit

Electromagnetic interference (EMI) seals on aircraft structures call for strict specifications, where reliability and safety are mandatory, especially when it comes to exposure to very harsh environments. The notion of corrosion resistance is a subject to which GETELEC responds with a range of anti-corrosion bi-material conductive seals.

Discover all our products and solutions dedicated to aeronautics industry

Download our products and solutions booklet dedicated to aeronautical industry
Download our products and solutions booklet dedicated to aeronautical industry

Aircraft grade silicone

image produit
Our aircraft grade silicone gasket have been specifically developed for applications requiring excellent fire resistance, low smoke and toxic gas emissions. All of our materials comply with the requirements of the Boeing FAR 25.853 and Airbus ABD0031 standards

Aircraft grade material

image produit
Our selection of aircraft grade materials is available in many elastomers (Butadienne, nitrile, Acrylic, fluorocarbons, fluorinated silicone, silicone, ethylene, propylene, EPDM, polychloroprene and neoprene) and different hardnesses ranging from 40 Shore A to 80 Shore A.

EMC conductive silicone gaskets

image produit
Our electrically conductive elastomers are developed in every respect by our chemical engineers. From the selection of raw materials to the final transformation, they create specific formulations for each request and master all the development processes and procedures. This mastery allows us to define the ideal material according to your equipment and your specifications, in order to offer you a bespoke conductive solution adapted to your needs.

EMC bi-material gasket

image produit
Bi-material EMC seals are an effective solution to the corrosion problems encountered when using conductive seals in contact with various electrolytic agents, salt spray and other acidic media. Resistant to water and pressure, our anti-corrosion bi-material seals provide electromagnetic shielding and optimal sealing of your equipment in a single groove, allowing you to optimise the size of your equipment while facilitating the machining of your mechanical part.

Thermally conductive pads

image produit
Entirely formulated and produced by our R&D laboratory Getelec Lab, our GTG thermal gap pad allow you to benefit from flexible products that will ensure that all surface asperities are taken into account when they are compressed and will thus ensure the optimal functioning of your equipment at both low and high temperatures.

Microwave absorbers

image produit
Our range of microwave absorbers will allow you to benefit from the best passive components for your technologies. Easily integrated thanks to a tailor-made design and the adhesive option, our absorbers will protect your electronic equipment in the K, Ku and Ka frequency bands, in addition to the L, S, C and X bands.

Aircraft grade silicone

Our aircraft grade silicone gasket have been specifically developed for applications requiring excellent fire resistance, low smoke and toxic gas emissions. All of our materials comply with the requirements of the Boeing FAR 25.853 and Airbus ABD0031 standards

Aircraft grade material

Our selection of aircraft grade materials is available in many elastomers (Butadienne, nitrile, Acrylic, fluorocarbons, fluorinated silicone, silicone, ethylene, propylene, EPDM, polychloroprene and neoprene) and different hardnesses ranging from 40 Shore A to 80 Shore A.

EMC conductive silicone gaskets

Our electrically conductive elastomers are developed in every respect by our chemical engineers. From the selection of raw materials to the final transformation, they create specific formulations for each request and master all the development processes and procedures. This mastery allows us to define the ideal material according to your equipment and your specifications, in order to offer you a bespoke conductive solution adapted to your needs.

EMC bi-material gasket

Bi-material EMC seals are an effective solution to the corrosion problems encountered when using conductive seals in contact with various electrolytic agents, salt spray and other acidic media. Resistant to water and pressure, our anti-corrosion bi-material seals provide electromagnetic shielding and optimal sealing of your equipment in a single groove, allowing you to optimise the size of your equipment while facilitating the machining of your mechanical part.

Thermally conductive pads

Entirely formulated and produced by our R&D laboratory Getelec Lab, our GTG thermal gap pad allow you to benefit from flexible products that will ensure that all surface asperities are taken into account when they are compressed and will thus ensure the optimal functioning of your equipment at both low and high temperatures.

Microwave absorbers

Our range of microwave absorbers will allow you to benefit from the best passive components for your technologies. Easily integrated thanks to a tailor-made design and the adhesive option, our absorbers will protect your electronic equipment in the K, Ku and Ka frequency bands, in addition to the L, S, C and X bands.