Page 33 - index

GT 5000 GT 5000 FLEX

SILVER-PLATED ALUMINUM FILLED SILVER-PLATED ALUMINUM FILLED
CONDUCTIVE SILICONE CONDUCTIVE SILICONE

• Low density • Low density (1.67g/cm )
3
• Excellent high-frequency performance • Low compression force
• Compatible with most alloy • Low RDC
• Very stable at high temperature • Highly conductive
(200°C peak) • Excellent attenuation performance
• Very high stability over time

Thanks to its space qualification according to the ESA-ECSS-Q-ST-70-02C TML RML (<1%)
and CVCM (<0.1%) standard, the GT5000 FLEX is suitable for aerospace application.

Standards - Specification Properties Standards - Test GT 5000 Flex
Properties GT 5000
Test MIL G 83528 Compression measurement GT5000 FLEX
Type MIL G 83528 B - Elastomer Silicone
Elastomer Silicone - Conductive filler Silver-plated aluminum
Conductive filler Silver-plated - Volume resistivity (Ω.cm) ASTM D 2240 < 0.0040
Aluminum
30 ± 5
Hardness (Shore A)
0.008
Volume resistivity (Ω.cm) MIL G 83528 < 0.0054 ASTM D 792
maximum Density (g/cm ) Method A 1.67
3
Hardness (shore A) ASTM D 2240 65 65 ± 7 ASTM D 412 Compressive stress (MPa)
Density (g/cm ) ASTM D 792 1.90 2.00 Break resistance (Mpa) Method A C 1.02
3
Method A ASTM D 412
Break resistance (Mpa) ASTM D 412 1.89 1.38 Elongation at break (%) Method A C 260
Method A C Minimum
ASTM D 412 Tear strength (N/mm) ASTM D 624 C 2.01
Elongation at break (%) 286 100-300
Method A C
5.25 Residual deformation after Deformation (%)
Tear resistance (N/mm) ASTM D 624 C 8.43 ASTM D 395 10.20 %
Minimum compression 70 hours at 100°C Method B
Residual deformation after 32 Attenuation curve GT5000 FLEX
compression 70 hours at ASTM D 395 17.30 Maximum Working temperature -55°C to +160°C
100°C (%) Method B TML (%) ECSS-ST-70-02C 0.22 %
Continuous operating -55°C to -55°C to RML (%) ECSS-ST-70-02C 0.21 %
temperature +160°C +160°C
Color Grey / Beige - available formats CVCM (%) ECSS-ST-70-02C 0.09 %
Color Gris / Beige
Molded SE (dB)
available formats
Customized cutting
Extruded Molded
Adhered by vulcanization Customized cutting

Sheet Extruded Frequency (MHz)
Adhesive Adhered by vulcanization
Sheet
Adhesive

32
375 Avenue Morane Saulnier 78530 - Buc, France www.getelec.com 33
Tel : +331 39 20 42 42 | info@getelec.com